Crane Truck Hire | Crane Truck Rental

As all of our customers have their own individual preferences when hiring or leasing Crane Trucks, from Crane make and specification, Vehicle Make, Cab Size, BHP and Axle Configuration, MV Commercial's Crane Truck Hire Fleet have it all, and if we dont we can build it for you.


7.5T Lorry Mounted Cranes FOR HIRE Front and Rear Mounted with Flatbed & or Dropside Body
18T Lorry Mounted Cranes FOR HIRE Front and Rear Mounted with Flatbed & or Dropside Body
Supply of an 18T Chassis cab, with an 8 tonne front axle, sub chassis to suit a fifteen tonne Crane, rear air suspension, Body 24ft Hardwood Floor Body, Galvanised Side raves, Ladder rack, work lights, a chain well, pad carriers, stainless steel tool boxes. All fitted in the most appropriate places for ease of operation.
Crane 15T/M to 18T/M Crane with 2 hydraulic extensions and factory fitted remote control.

26T Lorry Mounted Cranes Front and Rear Mounted with Flatbed & or Cheesewedge Body

Supply of a 26T Chassis Cab, with a 9 tonne front axle, sub chassis to suit up to a fifty tonne crane, Sleeper Cab, drawbar spec, minimum 380 horse power, Rear Air Suspension, Rear Lifting and Steering Back Axle. As access is an issue for a maximum length rigid we believe a rear lifting and steering can be invaluable. Body 26 foot Hardwood Floor Body, Galvanised Side Raves, 4 Lashing Rings on each side of the body, 6 foot hydraulic extension (for transporting 32 feet cabins), Twist locks at 10, 20, 24 and 32 feet and also twist locks that extend the width for 9 and 10 feet cabins. A ladder rack, work lights on the headboard, a chain well, pad carriers conveniently designed behind the front and rear legs, stainless steel tool boxes, a VBG 57mm coupling. A maximum gross weight of 44 tonne between the truck and the trailer can give you up to a 21 tonne payload Crane minimum of 40 tonne meter crane with 5 hydraulic extensions (i.e this allows you to lift an empty 20ft container
when the trailer is coupled with a rigid) and a radio remote control.

Supply of a 26T Chassis Cab, with a 9 tonne front axle, sub chassis to suit up to a fifty tonne crane, Sleeper Cab, drawbar spec, minimum 380 horse power, Rear Air Suspension, Rear Lifting and Steering Back Axle. As access is an issue for a maximum length rigid we believe a rear lifting and steering can be invaluable. Body 26 foot Hardwood Floor Body with ramps that allow you to load over the rear end of the vehicle and acts as a flat. The hydraulic ramps have 3 positions, vertical, horizontal and fully open. Our cheesewedge body has an excellent loading angle for moving for example tar pavers. There is a control box towards the rear of the vehicle to control the ramps and winch. As per our standard build the vehicle is fitted with ladder racks, work lights, chain well, pad carriers, winch, stainless steel tool boxes, 4 lashing rings at each side of the body, several tying points on the body, rope hooks on each cross member, a high specification body with an expected payload of around eight tonnes the truck can couple to a 20ft drawbar trailer. That can be modified to have a load through facility for loading plant from the trailer to the rigid. A maximum gross weight of 44 tonne between the truck and the trailer can give you up to a 21 tonne payload. Crane a minimum of an 18 tonne meter crane which allows you to double stack a 20 foot container or if there is a requirement to lift 24 foot or 32 foot ant-vandal proof containers and double stack them up to a 45 tonne meter crane would be recommended. Any more than this would greatly effect the payload as a plant body can be up to 1.2 tonnes heavier than a flat.

32T Lorry Mounted Cranes Front and Rear Mounted with Flatbed & or Cheesewedge Body

Supply of a 32T Chassis Cab, with a minimum of 2 x 7.5 tonne front axles, sub chassis to suit up to a fifty tonne crane, Sleeper Cab, drawbar spec, minimum 410 horse power, Rear Air Suspension, Rear Lifting and Steering Back Axle. As access is an issue for a maximum length rigid we believe a rear lifting and steering can be invaluable. Body 26 foot Hardwood Floor Body with ramps that allow you to load over the rear end of the vehicle and acts as a flat. The hydraulic ramps have 3 positions, vertical, horizontal and fully open. Our cheesewedge body has an excellent loading angle for moving for example tar pavers. There is a control box towards the rear of the vehicle to control the ramps and winch. Crane minimum of an 18 tonne meter crane which allows you to double stack a 20 foot container or if there is a requirement to lift 24 foot
or 32 foot ant-vandal proof containers and double stack them up to a 45
tonne meter crane we would recommend. Any more than this would greatly
effect the payload as a plant body can be up to 1.2 tonnes heavier than a flat.

40 Tonne Metre Crane Truck Hire

Supply of a 32T Chassis Cab, with a minimum of 2 x 7.5 tonne front axles, sub chassis to suit up to a sixty tonne crane, Sleeper Cab, drawbar spec, minimum 410 horse power, Rear Air Suspension, Rear Lifting and Steering Back Axle. As access is an issue for a maximum length rigid we believe a rear lifting and steering can be invaluable. Body 26 foot Hardwood Floor Body, Galvanised Side Raves, 4 Lashing Rings on each side of the body, 6 foot hydraulic extension (for transporting 32 feet cabins), Twist locks at 10, 20, 24 and 32 feet and also twist locks that extend the width for 9 and 10 feet cabins. A ladder rack, work lights on the headboard, a chain well, pad carriers conveniently designed behind the front and rear legs, stainless steel tool boxes, a VGB 57mm coupling Crane minimum of a 40 tonne meter crane which allows you to double stack a 20 foot container or if there is a requirement to lift 24 foot or 32 foot ant-vandal proof containers and double stack them up to a 45 tonne meter crane we would recommend.

60 Tonne Meter Crane Truck Hire

Supply of a 32T Chassis Cab, with a minimum of 2 x 9 tonne front axles, sub chassis to suit up to a sixty tonne crane, Sleeper Cab, drawbar spec, minimum 410 horse power, Rear Air Suspension, Rear Lifting and Steering Back Axle -As access is an issue for maximum length rigid we believe a rear lifting and steering can be invaluable. Also available as a Double Drive Rigid. Body 26 foot Hardwood Floor Body, Galvanised Side Raves, 4 Lashing Rings on each side of the body, 6 foot hydraulic extension (for transporting 32 feet cabins), Twist locks at 10, 20, 24 and 32 feet and also twist locks that extend the width for 9 and 10 feet cabins. A ladder rack, work lights on the headboard, a chain well, pad carriers conveniently designed behind the front and rear legs, stainless steel tool boxes, a VGB 57mm coupling for drawbar applications. Crane minimum of 60 tonne meter with 6 hydraulic extensions, this allows you to lift a 1000kva generator or if there is a requirement to lift and double stack 32 foot anti-vandal proof cabins, this crane could also be used for building complexes to take generators/cabins to site and would have the capability to perform as a mobile crane on site. The crane could be used for the quick and efficient loading and unloading of vehicles and does not need to conform to the same regulations as a mobile crane. It could alleviate the need for use of mobile cranes on site, particularly in the development of modular space complexes.

44T - 150T GVW Tractor unit, Double Drive & TAG axle options

Available with a range of crane sizes and specifications from 36 tonne meter to 125 tonne meter, with 4-8 extensions, with fly jib & winches.

In terms of tractor units most would be fitted with a minimum 60 tonne meter crane with 6 hydraulic extensions. Most shall be double drive units as they provide more traction and are good off road, whilst being very stable on the road offering a GVW of 65 or 80 Tonnes. Given the short wheelbase of a tractor unit with a crane weighing up to 8 or 9 tonnes sitting behind the cab, at MV commercial we like the stability of the double drive. This is something that requires careful consideration. In terms of the main specification of the vehicle we recommend a long wheelbase tractor that can couple to a trailer with a 1.7 meter pin.

In terms of tractor units most would be fitted with a minimum 60 tonne meter crane with 6 hydraulic extensions. Most shall be double drive units as they provide more traction and are good off road, whilst being very stable on the road offering a GVW of 65 or 80 Tonnes. Given the short wheelbase of a tractor unit with a crane weighing up to 8 or 9 tonnes sitting behind the cab, at MV commercial we like the stability of the double drive. This is something that requires careful consideration. In terms of the main specification of the vehicle we recommend a long wheelbase tractor that can couple to a trailer with a 1.7 meter pin.

Contact us on 0800 862 0122 to enquire about hiring crane vehicles from MV Commercial


Do you meet our requirements

Would you like to book a demo?